Skip to main content

Narrowbeam Hull Only

Narrowbeam Hull Only Specification widebeam
Steel Specification
Base plate 10mm
Hull sides 6mm
Cabin sides 5mm
Coach roof 4mm on 25mm x 25mm rolled box section
Bulk heads 4mm
Knees and stringers 50 x 50 x 5mm angle
Floor bearers 50 x 50 x 5mm angle
Rubbing strakes 50 x 12mm half round
Bulk head ribs 45 x 5mm flat
Doors
Stern: Steel back doors with sliding hatch, side door options available.
Bow: 48" x 27" opening, steel and hard wood door options available.
Principle Features
Fuel tank Steel integral fuel tank with feed, return, filler and vent, 40gal approximately.
Water Tank Approximately 150gal built into the fore deck with filler, vent and bolted inspection hatch. This is untreated on shell only and sailaway boats. This must be treated prior to use. Stainless steel options available.
Gas Locker Self draining and vented locker, space for 2 x 13 kg bottles.
Weed Hatch Complete with quick release cover.
Deck fittings One rope stud forward, 2 bollards aft, pole and plank rack and centre mooring ring, fender lugs fore, aft and sides.
Decks All self draining
Window apertures Cut to customer specification
Engine beds Supplied to suit choice of engine
Stern Tube Fitted to suit 30mm Vetus type (other options available)
Engine Cooling Skin tank with 1" ½ take offs and drain
Rubbing stakes 1 full length with quarter fore and aft, welded top and bottom
Handrail Integral handrails on coach roof with drainage points, Tubular handrail options available
Paint The boat is primed with Zinc phossfate primmer and the hull Is blacked up to the rubbing strake. (please be aware this is Only a holding coat and should have a sealing coat applied ASAP)
hull only
sailaway
sailaway lined
sailaway lined with additions
fully fitted
narrowbeam
hull only
sailaway
sailaway lined
sailaway lined with additions
fully fitted
 
click here to view the extras available on this model